1 7

Acid Crete 121 • Chemical Resistant Epoxy Floor Patch and Resurfacer

Acid and Chemical Resistant Concrete Leveling Compound

•Covers 50 sq. ft. @ 1/8" in 70°f

•Non Skid / Low odor

•6x stronger than concrete

Color
$295.00 USD
$295.00 USD
Sale Sold out
Shipping calculated at checkout.

Ordering over 5 units? Call your order in for cheaper shipping rates

Reccomended For Industrial Use

Acid Crete is a heavy-duty, acid resistant epoxy floor patch and resurfacer. Acid Crete is a 100% solids, epoxy industrial floor patch that can stand up to industrial usage and steel wheel traffic.

Highlights

  • Covers 50 sq. ft. @ 1/8" @70°f
  • Chemical and acid resistant
  • 100% solids epoxy formula
  • Use as a floor patch or resurfacer
  • 6x stronger than concrete
  • Withstand steel wheel traffic
  • Zero VOC – Zero HAPS
  • Non skid - Low odor
  • Holds tight at feather edges
  • Apply with a trowel
  • No peeling or cracking over time
  • Creates an attractive surface
  • Holds tight at a feather edge

Protects agaisnt:

  • Acetic, chromic hydrochloric (45%), Nitric (10%), Oleic, Sulfuric (75%), Phosphoric and many other chemicals. 

Specs

Use:Repair floors exposed to harsh chemicals

Coverage: 50 sq ft. @ 1/8'"

Cure Time: 12 hours at 70°

Protects against: Acetic, chromic hydrochloric (45%), Nitric (10%), Oleic, Sulfuric (75%), Phosphoric and many other chemicals. 

Pot Life: 15 minutes

Unit Size: 5 Gallons

Unit Weight: 62 lbs

Flexural Strength: 14,500 psi

Compressive Strength:18,00 - 20,000 psi

Tensile Strength:13,000 psi

Epoxy Type: Aromatic Amine

Flash Point: 230°F

Set Up Time: Initial set 6 hrs. - Traffic 24 hrs.

Storage Life: 6 mos.

Gel Time: 30 min.

Storage Life: 1 year

Application temp: 70°f

Recommended use

Ideal for preparing floors subject to harsh chemicals and acids in:

  • Laboratories
  • Food production facilities
  • Breweries
  • Chemical production warehouses

Materials

•5 Gallon Plastic Pail

•Resin

•Hardener

•Aggregate

•62 lbs per unit

Installation/Mixing

Step 1: Repair area must be clean and dry. If the area is not dry or clean, the epoxy will not adhere properly.


Step 2: Mix Part A with Part B in the pail supplied for 30 seconds…..Then introduce the aggregate and then blend into a homogenous state for approx. 30-45 seconds.


Step 3: Once you reach the desired consistency, apply the product to your project.


Step 4: This is a Trowel-able product. Spread with a hand trowel. Reminder Pot life is 15 minutes

Cure time: 12 hours at 70°

Pot life is 15 minutes

Step by Step application video here

SDS Sheets

PART A SDS

PART B SDS

PART C SDS

Terms of sale

All Floor Epoxies are designed for industrial usage, not residential

1. Coveraged as specified are approximately and not guaranteed as they vary with the individual application.

2. All prices are subject to change without notice.

3. All material are shipped F.O.B. Cleveland plant.

4. MIPCO assumes no liability beyond the purchase price of the material.

5. Returns must be authorized by our office and will be subject to a 30% restocking fee.

6. Absolutely NO returns after 30 days.

7. MIPCO will not take fault for varied results in product performance due to improper application/ improper application conditions.

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer

California Prop. 65 Policy

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer