Skip to product information
1 of 7

Fast Rock 143 - Fast Drying Epoxy Floor Patch and Resurfacer

2 Hour Fast-Setting Epoxy Floor Patch or Resurfacer For Concrete Floors In Industrial Settings

Regular price $260.00 USD
Regular price Sale price $260.00 USD
Sale Sold out
Shipping calculated at checkout.

Ordering over 5 units? Call your order in for cheaper shipping rates

Color

Recommended For Industrial Use

•Fast Drying Epoxy Floor Patch or Resurfacer For Concrete Floors

Industrial Floor Repair

•Sets In 2 Hours – Ready For Normal Traffic!

•Ideal To Use When You Need A Fast-Setting Floor Patch or Resurfacer

•Minimalize Down Time For Repairs

•100% Solids Epoxy Formula

•Zero VOC – Zero HAPS

•Environmentally Friendly!

•Low Odor and Non Skid

•Creates An Attractive and Easily-Cleaned Surface

•Holds Tight At Feather Edges

•Will Hold Up To Steel Wheel Traffic And Can Withstand Industrial Usage

•No Peeling or Cracking Over Time!

•Keep Your Floors Up To Par With A Permanent Solution

Specs

Use: Ideal for repairing floors with minimal downtime

Coverage: 30 sq ft. @ 1/8'"

Cure Time: 2 hours @ 70° 

Pot Life: 5 minutes

Unit Size: 5 Gallons

Flash Point: 225°

Epoxy Type: Amine

Unit Weight: 36 lbs.

Compressive Strength: 14,000 psi

Materials

5 Gal. Plastic Pail

Resin

Hardener

Aggregate

Installation

Step 1: Repair area must be clean and dry. If the area is not dry or clean, the epoxy will not adhere properly.


Step 2: Mix Part A with Part B in the pail supplied for 30 seconds…..Then introduce the aggregate and then blend into a homogenous state for approx. 30-45 seconds.


Step 3: Once you reach the desired consistency, apply the product to your project.


Step 4: This is a Trowel-able product. Spread with a hand trowel.

Cure time is 2 hours at 70°

Pot life is 5 minutes

Step by Step application video here

SDS Sheets

Terms of sale

All Floor Epoxies are designed for industrial usage, not residential

1. Coveraged as specified are approximately and not guaranteed as they vary with the individual application.

2. All prices are subject to change without notice.

3. All material are shipped F.O.B. Cleveland plant.

4. MIPCO assumes no liability beyond the purchase price of the material.

5. Returns must be authorized by our office and will be subject to a 30% restocking fee.

6. Absolutely NO returns after 30 days.

7. MIPCO will not take fault for varied results in product performance due to improper application/ improper application conditions.

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer

California Prop. 65 Policy

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer