Skip to product information
1 of 9

Zip Crete 137 • Self Leveling Epoxy Floor Coating and Resurfacer

Self leveling Concrete Leveling Compounds

• Smooth finish

• Covers 50 sq. ft. @ 1/16" @ 70°F

• Non Skid/No odor

Color
Regular price $310.00 USD
Regular price Sale price $310.00 USD
Sale Sold out
Shipping calculated at checkout.

Ordering over 5 units? Call your order in for cheaper shipping rates

For Industrial Use Only

Zip Crete 137 is a 100% epoxy solids formula and can be used a self-leveling epoxy floor resurfacer or topcoat that is resistant to heavy traffic and corrosive spillages. Since it is a resin rich system, it bonds with miraculous strength. This self leveling epoxy floor repair soaks into the pores of the concrete and holds tight even at the feather-edges. This product can be used a light bodied concrete floor coating.

Highlights

  • Cover 50 sq. ft. @ 1/16"
  • Apply at 50°f-70°f
  • Self-leveling epoxy flooring
  • Use as a floor resurfacer or floor patch
  • 100% Solids Epoxy Formula
  • Ideal for warehouse floors
  • Withstand steel wheel traffic
  • 6x stronger than concrete
  • Applied with a notched squeegee
  • Non skid and low odor
  • Zero VOC
  • Not recommended for residential use 
  • Industrial usage Is preferred 

Specs

Epoxy type: 100% epoxy solids

Use: Self Leveling Epoxy Floor Resurfacer

Coverage: 50 sq ft. @ 1/16'" - 1/18"

Cure Time: 24 hours at 70° 

Pot Life: 15 minutes

Application: Notched Squegee

Unit Size: 5 Gallons

Packaging: pre measured (3 part)

Unit Weight: 45 lbs

Flexural Strength: 2,500 psi

Compressive Strength: 15,000 psi

Tensile Strength:13,000 psi

Shelf Life: 1 year

Non skid

Low odor

Recommended Use

To be used as topcoat or resurfacer on concrete floors in:

  • Warehouses
  • Airplane hangers
  • Hospitals
  • Hotels
  • Loading Docks
  • Breweries

Materials

5 Gal. Plastic Pail

Resin

Hardener

Aggregate

Installation

Step 1: Repair area must be clean and dry. If the area is not dry or clean, the epoxy will not adhere properly.


Step 2: Mix Part A with Part B in the pail supplied for 30 seconds…..Then introduce the aggregate and then blend into a homogenous state for approx. 30-45 seconds.


Step 3: Once you reach the desired consistency, apply the product to your project.

Step 4: This is a Notched Squeegee applied product.

Cure time: 12 hours at 70°

Pot life is 15 minutes

See application video here

SDS Sheets

Terms of sale

All Floor Epoxies are designed for industrial usage, not residential

1. Coveraged as specified are approximately and not guaranteed as they vary with the individual application.

2. All prices are subject to change without notice.

3. All material are shipped F.O.B. Cleveland plant.

4. MIPCO assumes no liability beyond the purchase price of the material.

5. Returns must be authorized by our office and will be subject to a 30% restocking fee.

6. Absolutely NO returns after 30 days.

7. MIPCO will not take fault for varied results in product performance due to improper application/ improper application conditions.

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer

California Prop. 65 Policy

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer