Skip to product information
1 of 7

Pox-A-Crete 112 • Heavy Duty Epoxy Floor Patch and Resurfacer

Heavy Duty Epoxy Concrete Leveling Compounds

• Covers 50 sq. ft. @ 1/8"

• Resurface or patch concrete floors

• 100% Epoxy Solids • USDA approved

• Non skid/Low odor

Color
Regular price $295.00 USD
Regular price Sale price $295.00 USD
Sale Sold out
Shipping calculated at checkout.

**Ordering over 5 units? Call your order in for cheaper shipping rates

**Smaller units are available -- call direct

Recommended For Industrial Use

Pox-A-Crete is a heavy duty epoxy floor patch and resurfacer for concrete floors. Constructed with a 100% epoxy solids formula. It combines high strength liquid resins and rock-hard aggregates and is strong enough to withstand brutal steel wheel traffic without harm even at feather edges. 

Highlights

  • Covers 50 sq. ft. @ 1/8"
  • USDA approved floor repair
  • 100% Solids Epoxy Formula
  • Use as floor patch or resurface concrete floors
  • Apply at 70°f
  • Chemical resistant
  • Safe arounds foods
  • Withstand steel wheel traffic
  • 6x stronger than concrete
  • Zero VOC – Zero HAPS
  • Low Odor and Non Skid
  • Holds tight at feather edges
  • Apply with a trowel
  • No peeling or cracking over time
  • Creates an attractive surface
  • Holds tight at a feather edge

Specs

Epoxy type: 100% epoxy solids (3 part)

Use: Heavy Duty USDA Approved Epoxy Floor Patch/Resurfacer

Coverage: 50 sq ft. @ 1/8'"

Cure Time: 12 hours at 70°

Pot Life: 15 minutes

Unit Size: 5 Gallons

Unit Weight: 62 lbs

Flexural Strength: 10,000 psi

Compressive Strength:16,000

Tensile Strength:13,000 psi

Storage Life: 1 year

Application temp: 70°f

Reccomended Use

Ideal general use heavy-duty floor repair product with a USDA approval for:

  • Food Production facilities
  • Breweries
  • Food storage warehouses
  • Restaraunts
  • Bakeries
  • Fisheries

Materials

5 Gal. Plastic Pail

Resin

Hardener

Aggregate

Installation/Mixing

Step 1: Repair area must be clean and dry. If the area is not dry or clean, the epoxy will not adhere properly.


Step 2: Mix Part A with Part B in the pail supplied for 30 seconds…..Then introduce the aggregate and then blend into a homogenous state for approx. 30-45 seconds.


Step 3: Once you reach the desired consistency, apply the product to your project.


Step 4: This is a Trowel-able product. Spread with a hand trowel. Reminder Pot life is 15 minutes

Cure time: 12 hours at 70°

Pot life is 15 minutes

Step by Step application video here

SDS Sheets

Terms of sale

All Floor Epoxies are designed for industrial usage, not residential

1. Coveraged as specified are approximately and not guaranteed as they vary with the individual application.

2. All prices are subject to change without notice.

3. All material are shipped F.O.B. Cleveland plant.

4. MIPCO assumes no liability beyond the purchase price of the material.

5. Returns must be authorized by our office and will be subject to a 30% restocking fee.

6. Absolutely NO returns after 30 days.

7. MIPCO will not take fault for varied results in product performance due to improper application/ improper application conditions.

California Prop 65

California Proposition 65 Policy

Contains: Silica, crystalline

Respirable size airborne particles that are know for causing cancer